©2025 Uticor. All rights reserved. All Product names, trademarks and registered trademarks are the
property of their respective manufacturers or legal holders.
Uticor disclaims any proprietary interest in the marks or names of others.
Uticor HMI
Uticor UT3 Series Spec Sheet Uticor Tough UT3 Series Manual Uticor Tough UT3 Sun Series Spec Sheet Uticor Tough Panel Selection Specs Connecting UT-HMI to AB Controllers UT3E Cutouts
Uticor ToughSmart
Marquee
Uticor ToughSmart Marquee Spec Sheet Uticor ToughSmart Marquee Hardware Manual
SPECIFICATION SHEETS
Software
UTICOR Product Line
Description
PowerPanel 5.4
G2 & Q2 Panel
This is the software to be used for G2 panels and Q2 panels. Call 563-650-7065 to get the license.
10F54
PMD 180 Series
The PMD 180 is a compact message display that can be interfaced to a name brand PLC through
the PLC’s program loader port. With the PMD 180, you will also receive programming software that
you install on an IBM (or compatible) computer. Use the software to program messages online or
offline, set up the computer’s communication parameters, and load the PLC driver information
into the PMD. Call 563-650-7065 to get the license.
10F50
PMD 200 Series
Using this software, PMD 200 can be programmed using any ACSII terminal or personal computer
with an RS232-C interface. The PMD 200 can be interfaced to a printer either to print the entire
program or to print individual messages as they are selected. Call 563-650-7065 to get the license.
10F64
PGI Family
uWIN is a comprehensive graphics and interface program, for use with Windows 3.1 and higher,
that allows you to program the Power Panel. Call 563-650-7065 to get the license.
Power Text 1.1
The software is used to download your configuration before connecting the panel and
communicating with a PLC. Help Topics are provided to help you configure your panel. You design
and configure your Panel program off-line and save it to disk. The program may then be
transferred to the PowerText Panel. Call 563-650-7065 to get the license.
Power Marquee
P3000
Power Marquee
This software is used to configure a Message Project for Power Marquees. You will install this
software to run from an IBM or compatible computer. The Power Marquee can be configured on-
line or off-line. You can add or edit messages, embed up to 4 data values, and set the Triggers for
each message. Call 563-650-7065 to get the license.
Touch PRLS 1.2
Touch PRLS
Touch PRLS programming software is a user friendly Windows based program that allows you to
program the Touch PRLS. You would be able to configure the Touch PRLS using the Touch PRLS
programming software and Power Panel programming software version 4.0 or Later. Call 563-650-
7065 to get the license.
LEGACY SOFTWARE RELEASES
Technical Resources
Uticor is committed to delivering rugged, top-tier automation products backed by exceptional customer and technical support. We continue our proud legacy of innovation and toughness, introducing new, value-packed products and enhancements to our Toughpanels. With a strong global network of over 100 distributors, Uticor ensures reliable, high-performance solutions built to last — true to the tradition of “Uticor Tough.”
Uticor is dedicated to providing you the Robust, Tough, Top of
Line automation products, with the best possible service in the
industry.
Type
Version
Description
UT3 Enhanced
L4_30
Latest Firmware for UT3 Enhanced Series Touchpanel.
UT3 Touchpanel
L2_38
Latest Firmware for UT3 Series Touchpanel.
UTP Toughpanel
K.1.1
This Firmware applies only to UTP Series Touch Panel Family and should NEVER be used to
upgrade an SE series of Panels. Please note that if your unit's serial number begins with 05 or
lower, please call tech support before downloading the firmware.
UTP SE Toughpanel
I.17.102
This Firmware applies only to UTP-SE Series of Panels and should NEVER be upgraded to an UT3
Series TouchPanel or UTP Series Touchpanel
UTPLC
D.16.1
Latest Firmware for EZPLC.
Tough Marquee
N
Firmware for Uticor Tough Marquee.
Tough Smart
Marquee
Coming Soon
Firmware for Uticor Tough Smart Marquee.
UTNVC
1.0.2
Firmware for UT-NVC software for Uticor Tough Panel.
LATEST FIRMWARE RELEASES
Software &
Version
Uticor Product Line
Description
uWin ToughPanel
3.2.22
ToughPanel (UT3 & UTP)
The latest Editor upgrade for the UTICOR Touchpanel family. uWin programming software is a
universal software for programming the UT3, UTP, UTTP and UTE products. Easy-to-use Windows-
based menus and toolbars lead you through building a project. Run-time (online) editing makes
debugging fast. Included in this new version - addition of 12" and 15" UT3 Enhanced Models to the
line up. Support for 16-bit colors on all UT3 Enhanced Models. Firmware upgrade via Ethernet.
Must have a previous full version of uWin installed if installing upgrade.
UTPLC Editor 1.8.42
UTICOR PLC
UTPLC Editor has Windows type Folder organization for Quick Easy Search just like RSLogix and
other high end programming software that costs thousands of dollars. The UTPLC Editor has a
structured programming software. You do not have to scroll through literally hundreds of rungs to
find your I/O mapping, subroutines or interrupts.
ToughSmart
Marquee 1.1.13
Tough Smart Marquee
Now with UTICOR Smart Marquee import tag database directly from PLC, Store and Display user
programmed messages, Math Logic/Scripting, Command String Viewer for PLC ladder Logic, Built-
in Message Simulator, Built-in Alarm and Message Database, Store and trigger practically
unlimited messages in Marquee Software.. etc.
Tough Marquee
1.2.34
Tough Marquee
Most PLCs have a fairly simple mechanism to generate an ASCII string, but we made it even easier.
You can use our UTICOR Marquee String Generator to configure UTICOR Marquee, preview
messages and generate ASCII strings which can be simply copied and pasted into the PLC ladder
logic.
LATEST SOFTWARE RELEASES
©2025 Uticor. All rights reserved. All Product names, trademarks and registered trademarks
are the property of their respective manufacturers or legal holders.
Uticor disclaims any proprietary interest in the marks or names of others.
Uticor HMI
Uticor UT3 Series Spec Sheet Uticor Tough UT3 Series Manual Uticor Tough UT3 Sun Series Spec Sheet Uticor Tough Panel Selection Specs Connecting UT-HMI to AB Controllers UT3E Cutouts
Uticor ToughSmart
Marquee
Uticor ToughSmart Marquee Spec Sheet Uticor ToughSmart Marquee Hardware Manual
SPECIFICATION SHEETS
Software &
Version
Uticor Product Line
Description
uWin ToughPanel
3.2.22
ToughPanel (UT3 & UTP)
The latest Editor upgrade for the UTICOR Touchpanel family. uWin programming software is a
universal software for programming the UT3, UTP, UTTP and UTE products. Easy-to-use Windows-
based menus and toolbars lead you through building a project. Run-time (online) editing makes
debugging fast. Included in this new version - addition of 12" and 15" UT3 Enhanced Models to the
line up. Support for 16-bit colors on all UT3 Enhanced Models. Firmware upgrade via Ethernet.
Must have a previous full version of uWin installed if installing upgrade.
UTPLC Editor 1.8.42
UTICOR PLC
UTPLC Editor has Windows type Folder organization for Quick Easy Search just like RSLogix and
other high end programming software that costs thousands of dollars. The UTPLC Editor has a
structured programming software. You do not have to scroll through literally hundreds of rungs to
find your I/O mapping, subroutines or interrupts.
ToughSmart
Marquee 1.1.13
Tough Smart Marquee
Now with UTICOR Smart Marquee import tag database directly from PLC, Store and Display user
programmed messages, Math Logic/Scripting, Command String Viewer for PLC ladder Logic, Built-
in Message Simulator, Built-in Alarm and Message Database, Store and trigger practically
unlimited messages in Marquee Software.. etc.
Tough Marquee
1.2.34
Tough Marquee
Most PLCs have a fairly simple mechanism to generate an ASCII string, but we made it even easier.
You can use our UTICOR Marquee String Generator to configure UTICOR Marquee, preview
messages and generate ASCII strings which can be simply copied and pasted into the PLC ladder
logic.
LATEST SOFTWARE RELEASES
Type
Version
Description
UT3 Enhanced
L4_30
Latest Firmware for UT3 Enhanced Series Touchpanel.
UT3 Touchpanel
L2_38
Latest Firmware for UT3 Series Touchpanel.
UTP Toughpanel
K.1.1
This Firmware applies only to UTP Series Touch Panel Family and should NEVER be used to
upgrade an SE series of Panels. Please note that if your unit's serial number begins with 05 or
lower, please call tech support before downloading the firmware.
UTP SE Toughpanel
I.17.102
This Firmware applies only to UTP-SE Series of Panels and should NEVER be upgraded to an UT3
Series TouchPanel or UTP Series Touchpanel
UTPLC
D.16.1
Latest Firmware for EZPLC.
Tough Marquee
N
Firmware for Uticor Tough Marquee.
Tough Smart
Marquee
Coming Soon
Firmware for Uticor Tough Smart Marquee.
UTNVC
1.0.2
Firmware for UT-NVC software for Uticor Tough Panel.
LATEST FIRMWARE RELEASES
Software
UTICOR Product Line
Description
PowerPanel 5.4
G2 & Q2 Panel
This is the software to be used for G2 panels and Q2 panels. Call 563-650-7065 to get the license.
10F54
PMD 180 Series
The PMD 180 is a compact message display that can be interfaced to a name brand PLC through
the PLC’s program loader port. With the PMD 180, you will also receive programming software that
you install on an IBM (or compatible) computer. Use the software to program messages online or
offline, set up the computer’s communication parameters, and load the PLC driver information
into the PMD. Call 563-650-7065 to get the license.
10F50
PMD 200 Series
Using this software, PMD 200 can be programmed using any ACSII terminal or personal computer
with an RS232-C interface. The PMD 200 can be interfaced to a printer either to print the entire
program or to print individual messages as they are selected. Call 563-650-7065 to get the license.
10F64
PGI Family
uWIN is a comprehensive graphics and interface program, for use with Windows 3.1 and higher,
that allows you to program the Power Panel. Call 563-650-7065 to get the license.
Power Text 1.1
The software is used to download your configuration before connecting the panel and
communicating with a PLC. Help Topics are provided to help you configure your panel. You design
and configure your Panel program off-line and save it to disk. The program may then be
transferred to the PowerText Panel. Call 563-650-7065 to get the license.
Power Marquee
P3000
Power Marquee
This software is used to configure a Message Project for Power Marquees. You will install this
software to run from an IBM or compatible computer. The Power Marquee can be configured on-
line or off-line. You can add or edit messages, embed up to 4 data values, and set the Triggers for
each message. Call 563-650-7065 to get the license.
Touch PRLS 1.2
Touch PRLS
Touch PRLS programming software is a user friendly Windows based program that allows you to
program the Touch PRLS. You would be able to configure the Touch PRLS using the Touch PRLS
programming software and Power Panel programming software version 4.0 or Later. Call 563-650-
7065 to get the license.
LEGACY SOFTWARE RELEASES
Technical Resources
Uticor is committed to delivering rugged, top-tier automation products backed by exceptional customer and technical support. We continue our proud legacy of innovation and toughness, introducing new, value-packed products and enhancements to our Toughpanels. With a strong global network of over 100 distributors, Uticor ensures reliable, high-performance solutions built to last — true to the tradition of “Uticor Tough.”
Uticor is dedicated to providing you the Robust, Tough, Top of
Line automation products, with the best possible service in the
industry.
